Canon A95 - Manual (Page 126)

124
List of Messages
The following messages may appear on the LCD monitor.
z For messages which may appear when a printer is connected, refer to the Direct Print User Guide.
Busy...
The camera is recording image data to the CF card.
The playback mode is running.
No memory card You turned on the power without a CF card installed.
Cannot record ! You attempted to shoot with no CF card installed.
Memory card error ! There is something wrong with the CF card.
Memory card full CF card is too full to accommodate more images or print settings.
Naming error !
The file could not be created because there is a file with the same name as
the directory that the camera is attempting to create, or the highest possible
file number has already been reached. In the Set up menu, please set [File
No. Reset] to [On]. After you save all the images you wish to retain onto a
computer, format the CF card (p. 19). Please note that formatting will erase
all the existing images and other data.
Change the batteries
Battery charge is insufficient to operate the camera. Replace all batteries at
the same time with new AA-size alkaline batteries (p. 15) or fully recharged
Canon NiMH batteries.
No image No images recorded on CF card.
Image too large
You attempted to play back an image larger than 4064 x 3048 pixels or with a
large file size.
Incompatible JPEG
format
You attempted to play back an incompatible JPEG file.
Corrupted data You attempted to play back an image with corrupted data.