Casio XJ-S43W - Manual (Page 26)

26
About the “Signal Specific” Setting Unit
For the items that have “Signal Specific” in the “Setting Unit” column of the above table,
the setting is saved for the specific type of signal (XGA/60Hz, SXGA/60Hz, etc.) that is
being input when the setting is performed, and not for a specific input source.
Volume Adjustment Main Menu
Note
The following menu operations are not supported if no audio is being input to the
HDMI port during projection of an HDMI signal.
Setting
Name
Input
Setting
Unit
Description
Volume RCVHDN Source
Specific Use this sub-menu to adjust the volume level of the
projector’s speaker.
z Changing this setting when there is no input signal
changes the volume setting of the currently selected
signal source.
Restore
Menu
Defaults RCVHDN Source
Specific Use this sub-menu to return Volume to its initial default
setting.
z This menu item can be executed even when there is
no input signal. Restoring menu defaults when there is
no input signal will restore defaults for the currently
selected input source.