Casio XJ-S43W - Manual (Page 28)

28
Ceiling Mount RCVHDN Single Use this sub-menu to configure the projector for use in
an installation in which it is positioned upside down.
On:
Flips the projected image horizontally and vertically.
Off *:
Projects a normal image.
Startup
Screen RCVHDN Single Use this sub-menu to specify whether or not a startup
screen should be projected whenever the projector is
turned on.
Logo:
Select this option to project the projector’s built-in logo
screen at startup.
None *:
Select this option when you do not want to project a
startup screen.
No Signal
Screen RCVHDN Single Use this sub-menu to specify what should be projected
when there is no input signal to the projector.
Blue *:
Select this option to project a blue screen.
Black:
Select this option to project a black screen.
Logo:
Select this option to project the projector’s built-in logo
screen.
Blank Screen RCVHDN Single Use this sub-menu to specify what should be projected
after the [BLANK] key is pressed.
Blue:
Select this option to project a blue screen.
Black *:
Select this option to project a black screen.
Logo:
Select this option to project the projector’s built-in logo
screen.
Restore
Menu
Defaults RCVHDN Source
Specific Use this sub-menu to return all of the sub-menu items on
the Screen Settings main menu to their initial default
settings.
z Restoring menu defaults will restore defaults for the
currently selected input source.
z Note that the “Keystone Correction”, “Projection Mode”,
“Startup Screen”, “No Signal Screen”, and “Blank
Screen” settings are always returned to their initial
defaults, regardless of the currently selected input
source.
Setting
Name
Input
Setting
Unit
Description