Casio XJ-S43W - Manual (Page 43)

43
POWER
TEMP
LAMP
:
:
:
Amber flashing
Red steady
Red steady
Red steady Power has turned off automatically due to a fan problem. Confirm
that the POWER/STANDBY indicator is lit red (without flashing) and
that the fan has stopped. After checking the POWER/STANDBY
indicator, disconnect the power cord from the projector and wait for
all of the projector’s indicators to go out. Next, reconnect the power
cord and turn projector power back on.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
Message : There is a problem with
the fan. The projector
will turn off.
POWER
TEMP
LAMP
:
:
:
Amber flashing
Red steady
Red steady
– Power has turned off automatically due to a system problem. After
confirming that the POWER/STANDBY indicator is lit red (without
flashing), disconnect the power cord from the projector and wait for
all of the projector’s indicators to go out. Next, reconnect the power
cord and turn the projector back on.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
Message : A system problem has
occurred. The projector
will turn off.
POWER
TEMP
LAMP :
:
: Green steady
–
– A system problem has occurred, which may cause problems with
some functions. Turn off the projector, disconnect the power cord
from the projector and wait for all of the projector’s indicators to go
out. Next, reconnect the power cord and turn the projector back on.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
Press the [ESC] key to clear the warning message.
Message : A system problem has
occurred. Normal
projection is not
possible.
POWER
TEMP
LAMP :
:
: Green steady
–
–
Message : There is some problem
with the system.
The audio function may
not operate correctly.
POWER
TEMP
LAMP :
:
: Green steady
–
–
Message : There is some problem
with the system.
Movies may not play
back correctly.
POWER
TEMP
LAMP :
:
: Green steady
–
– Zoom and focus cannot be performed due to some trouble in the
optical drive circuit. Turn off the projector and then turn it back on
again.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
Press the [ESC] key to clear the warning message.
Message : Zoom and focus cannot
be performed for some
reason. Try turning the
projector off and then
back on again.
If this message
reappears, request
servicing.
POWER
TEMP
LAMP
:
:
:
Amber flashing
Red steady
Red steady
– The projector was turned off automatically due to some problem that
was probably caused by external digital noise or some other reason.
Confirm that the POWER/STANDBY indicator is lit red (without
flashing). After checking the POWER/STANDBY indicator, disconnect
the power cord from the projector and wait for all of the projector’s
indicators to go out. Next, reconnect the power cord and turn
projector power back on.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
Message : –
Indicator/Error Message Description and Required Action