COMP Cams 5456 GM Cam Phaser Limiter Kit User Manual
Page 4
COMP Cams
®
3406 Democrat Rd.
Memphis, TN 38118
Phone: (901) 795-2400 Fax: (901) 366-1807
www.compcams.com
Part #COMP4-122
Revised 6/19/2014
Step 1: The first step once the cam phaser has been removed from the engine is to temporarily install the safety bolt,
washers, and nut. This safety bolt assembly is provided to ensure the trigger wheel cannot come off during normal
handling. Remove the safety bolt just prior to installing the cam phaser back onto the camshaft.
Step 2: Special tools are required to properly disassemble the cam phaser. We designed and provided these tools as part of
the kit. The Cam Phaser Spring Compression Tool is designed to snap onto a standard 3/8” ratchet.
Cam Phaser Spring Compression
Tool installed on 3/8 in. ratchet
Cam Phaser Trigger Wheel
Safety Bolt Assembly