COMP Cams 5456 GM Cam Phaser Limiter Kit - Manual (Page 5)

COMP Cams ®
3406 Democrat Rd.
Memphis, TN 38118
Phone: (901) 795-2400 Fax: (901) 366-1807
www.compcams.com
Part #COMP4-122
Revised 6/19/2014
Step 3: Looking at the side of the cam phaser, locate the pin-bolt that the cam phaser spring is latched onto.
Step 4: Using a soft cloth to protect the cam gear, lock just the gear portion of the cam phaser in a vise. Do not over
tighten the vise, use just enough force to secure the gear. Position the cam phaser in the vise with the pin-bolt at the 2-3
o’clock position, looking at it from the cam side. Take note that the first bolt located clockwise from this pin-bolt will not
be removed. We will be using that bolt to pivot the cam phaser cover out of the way.
Cam Phaser Spring Cam phaser pin-bolt
Cam phaser pin-bolt
Cam phaser pivot bolt