Digilent 410-087P-KIT - Manual (Page 35)

Spartan-3E Starter Kit Board User Guide www.xilinx.com 35
UG230 (v1.0) March 9, 2006
Programming the FPGA, CPLD, or Platform Flash PROM via USB R
The Spartan-3E Starter Kit board has an XCF04S Platform Flash PROM. Select xcf04s
from the drop list, as shown in
Figure 4-16 . Click Add, then click Next >.
The PROM Formatter then echoes the settings, as shown in Figure 4-17 . Click Finish.
The PROM Formatter then prompts for the name(s) of the FPGA configuration bitstream
file. As shown in
Figure 4-18 , click OK to start selecting files. Select an FPGA bitstream file
(*.bit). Choose No after selecting the last FPGA file. Finally, click OK to continue.
Figure 4-16: Choose the XCF04S Platform Flash PROM
Figure 4-17: Click Finish after Entering PROM Formatter Settings
UG230_c4_17_022706
UG230_c4_18_022706