Dodge 2012 Ram - Manual (Page 562)

1. Make sure the trailer brakes are in good working
condition, functioning normally, and properly adjusted.
See your trailer dealer if necessary.
2. Hook up the trailer and make the electrical connec-
tions according to the trailer manufacturer’s instructions.
3. When a trailer with electric/EOH brakes is plugged
in, the trailer connected message should appear in the
EVIC (if the connection is not recognized by the ITBM,
braking functions will not be available), the GAIN setting
will illuminate and the correct type of trailer must be
selected from the EVIC options.
4. Press the UP or DOWN button on the steering wheel
until System Setup appears on the screen.
5. Press the SELECT button and then press the UP or
DOWN buttons until Trailer Brake Type appears on the
screen.
560 STARTING AND OPERATING