Rear lamp bar id marker (dual rear, Wheels) — if equipped – Dodge 2012 Ram User Manual
Page 674
Advertising
![background image](/manuals/673082/674/background.png)
3. Pull the bulb straight from it’s socket and replace.
Rear Lamp Bar ID Marker (Dual Rear Wheels) — If
Equipped
1. Loosen the two screws and the housing to gain access
to the bulb sockets.
2. Turn the socket
1
⁄
4
turn counterclockwise to access the
bulb.
3. Pull the bulb straight out from the socket.
4. Reverse the procedure for installation of the bulbs and
housing.
672
MAINTAINING YOUR VEHICLE
Advertising