Drawmer TS2 Dual Tube Compressor - Manual (Page 13)

Tube Station 2 OPERATORS’ MANUAL 11
TECHNICAL SPECIFICATIONS
(Measurements taken using +4dBu balanced input where applicable)
ANALOGUE
INPUT IMPEDANCE 20KS (bal)
MAXIMUM INPUT LEVEL +21dBu
LINE INPUT CMR Better than !40dB (20Hz - 22KHz)
OUTPUT IMPEDANCE 100S
MAXIMUM OUTPUT LEVEL +20dBu
BANDWIDTH 12Hz to 52KHz (!1dB)
NOISE (ref +4dBu) !86dB (22Hz - 22KHz)
DISTORTION
Typical Input 100Hz 1KHz 10KHz
Unity Gain < 0.03% < 0.03% <0.03%
POWER REQUIREMENTS 115Volt or 230Volt at 50-60Hz, 15VA
FUSE RATING T160mA for 230Volt, T315mA for 115Volt
CONFORMING TO IEC127-2
FUSE TYPE 20mm x 5mm, Class 3 Slo-Blo, 250Volt working
CASE SIZE 482mm (w) x 44mm (h) x 228mm (d)
WEIGHT (incl packaging) 4.3 Kg
DIGITAL MODULE
THD and NOISE >105dB Unweighted
>108dB A- Weighted
MAXIMUM INPUT LEVEL +21dBu = 0dBfs