Power connection – Drawmer TS2 Dual Tube Compressor User Manual
Page 5
Advertising
Tube Station 2 OPERATORS’ MANUAL
3
Accessing the internal power switch and fuse
POWER CONNECTION
If the unit is required to operate at a mains input voltage which is different to that as
supplied:
The following procedure must be carried out by a qualified technical engineer.
1:
Disconnect the unit from the mains.
2:
Remove the twelve screws that retain the top cover.
3. Set the voltage rating and replace the fuse.
Mains Voltage
230V
Fuse Value 160mA.
Mains Voltage
115V
Fuse Value 315mA.
4. Replace the cover.
Advertising