Emerson Radio ES9 - Manual (Page 13)

12
7. Playback will continue until all tracks have
been played. The player then stops and the
display will show the total number of tracks
and playing time on the disc.
8. Press the OPEN button or touch the OPEN sensor to open the CD door and
remove your disc. Press OPEN again to close the CD door and press the
POWER button to shut the power ‘Off’. The CD door lighting goes ‘Off’.
NOTE: If the disc is not removed, or another
function selected, within 1 minute the system
power shuts off automatically and the display
changes from CD function to clock function. If
this occurs you will need to press the POWER
button again to turn the unit ‘On’ and press the
OPEN button to remove your disc.
Pause Control
To pause momentarily during playback press the
(Play/Pause) again. The sound stops and
the elapsed time display flashes, but the disc
continues to spin. Press the (Play/Pause)
button once more to cancel pause and resume playback. The elapsed time display
stops flashing and playback resumes at the same point
To Begin Playback From A Specific Track
As soon as you load your disc and close the CD door, press either the or the
buttons until the desired track number appears in the display. Playback will
begin on the desired track and continue until the end of the disc.
To Skip Tracks During Playback
Press the button once during playback to skip forward to the next track. Press
the button repeatedly to skip forward to higher numbered tracks. Release the
button when the desired track number appears in the display and playback will
begin on that track.
ES9_ib.p65 16/10/2001, 10:28 12