Emerson Radio ES9 - Manual (Page 15)

14
Programmed Playback
This feature allows you to program any disc to play only the tracks you want to
hear in the order you want to hear them. Up to a total of 21 tracks can be
programmed.
NOTE: A disc can only be programmed while the CD player is stopped.
1. If the disc is playing press the STOP button to stop playback.
2. Press the REPEAT/PROG button on the main
unit, or the REP/PGM button on the remote
control, two times. The PGM (Program)
indicator appears in the display together with
Program Memory number “P:01” and Track
Number “00”.
3. Press the or buttons to select the
first track to be programmed.
Example: Track number 5.
4. When the desired track number appears in
the display press the REPEAT/PROG or REP/
PGM buttons again to enter that track in
Program Memory P:01. The track display
returns to “00” and the Program Number
display advances to “P:02”
5. Repeat steps 3 and 4 until you have entered up to 21 tracks in the program
memory. NOTE: The same track number can be programmed more than
once if desired.
6. Press (Play/Pause) button. The PGM
indicator remains in the display. The selected
tracks will be played in the programmed order.
After the last programmed track has been
played the player stops, the PGM indicator
disappears, and the display shows the total tracks and playing time of the disc
After 1 minute the power shuts off automatically.
To cancel programmed playback at any time, press the STOP button.
ES9_ib.p65 16/10/2001, 10:28 14