Emerson Radio ES9 - Manual (Page 23)

22
3. Press the ALM ON/OFF button on the main unit or the AL ON/OFF button on
the remote to set or cancel the alarm. If the display shows “ON”, the alarm is
set. If the display shows “OFF” the alarm is canceled.
• If you selected “BUZZER” as the alarm
source, the “ON” indicator appears and
“BUZZER” indicator flashes in the display.
• If you selected “RADIO” as the alarm source,
the display will show the radio frequency and
the preset station number will flash. Press the
AM/FM button to select the desired band if
necessary, and then press the or
buttons to select the preset station that you
wish to hear at the wake up time.
• If you selected “CD” as the alarm source,
the track number will flash. Press the
or buttons to select the track number
you want to hear at the wake up time.
NOTE: Don’t forget to load the desired CD in the player before you go to
sleep.
4. After setting the alarm time and alarm source
as desired press the MEM button to return to
the Time/Temperature, Tuner, or CD display.
The alarm indicator and the alarm source you
selected will appear in the upper right corner
of the display. If the ALARM indicator and
alarm source do NOT appear, press the MODE button twice and then the ALM
ON/OFF button to activate the alarm.
ES9_ib.p65 16/10/2001, 10:28 22