Cabletron Systems HSIM-FE6 - Manual (Page 21)

Installing Fast Ethernet (Port) Interface Modules
HSIM-FE6 User’s Guide 2-3
Figure 2-1 Removing the FEPIM Coverplate
2. Refer to Figure 2-2 . Gently pull the faceplate of the HSIM-FE6
forward to allow room for the FEPIM to be aligned over the connector.
3. Align the FEPIM connector into the HSIM-FE6 connector pins. See
Figure 2-2 .
!
CAUTION
Before installing an FE-100FX or FE-100F3 module into the
host module, remove the protective cover on the SC connector.
!
CAUTION
Ensure that the FEPIM connector aligns with the HSIM-FE6
connector pins to prevent bending the pins. This can damage
both the HSIM-FE6 and the FEPIM.
coverplate_remove
FEPIM
Coverplate
Standoff Screws
HSIM-FE6
FEPIM 2
SP
FEPIM 1