Cabletron Systems HSIM-FE6 - Manual (Page 33)

HSIM-FE6 User’s Guide 3-1
CHAPTER 3
LANVIEW LEDs
This chapter describes how to use the LANVIEW LEDs to monitor the
HSIM-FE6 status and diagnose HSIM-FE6 problems.
3.1 HSIM-FE6 LEDs
Refer to Figure 3-1 for the location of the HSIM-FE6 LEDs and Table 3-1
for a description of the LED indications.
Figure 3-1 HSIM-FE6 LANVIEW LEDs
NOTE
The terms flashing, blinking, and solid used in Table 3-1
indicate the following:
Flashing indicates an irregular LED pulse.
Blinking indicates a steady LED pulse (approximately 50% on
and 50% off).
Solid indicates a steady LED light. No pulsing.
HSIM-FE6 FEPIM 1 FEPIM 2
SP
Transmit (TX) Receive (RX) Transmit (TX) Receive (RX)
LEDs for FEPIM 1 LEDs for FEPIM 2