EVCO EVXS815P9 Installer manual - Manual (Page 51)

EVCO S.p.A. EVSX815 | Installer manual ver. 1.3 | Code 144XS815E134
page 51 of 60
For further information, consult the documentation relative to RICS and EVUSBREC01.
13.3 EVPROG01 connection kit
13.3.1 Introduction
EVPROG01 is a connection kit.
The kit can be used to connect the device to the Parameters Manager set-up software system.
The kit is made up from the following parts:
- non-optoisolated RS-232/TTL serial interface EVIF20TRX
- 1256800042 telephone cable
- 1256800079 adapter.
The kit can be used on condition that the device is powered.
13.3.2 Description
The following drawing illustrates the aspect of EVPROG01.