Fieldmann FZD 4010-E - Manual (Page 10)

FZD 4010-E
10 EN Safe operation principles | Maintenance and storage | Safety measures and instructions
If the machine got jammed, switch-off the drive unit before clearing a blockage. Do not allow
processed material fragments to get into the unit, avoid its permanent damage, or eventual
ignition.
Maintain all covers and deflectors in a good condition and in place.
Never transport the equipment with the drive unit switched-on.
Whenever you leave the equipment, switch-off the drive unit and disconnect from power
supply.
Never incline the shredder while it is energized.
Keep the extension cable(s) away from the shredding mechanism parts. Avoid their damage
and a possible electrical shock hazard.
5. MAINTENANCE AND STORAGE
If you intend to carry out a service inspection, storage or replacement of some part, switch-off
the engine, disconnect the equipment from the mains and make sure that all moving parts
have been stopped. Before starting to carry out the planned activity, wait until the equipment
cools down.
Let the equipment cool down before storage.
While carrying out any service maintenance of the shredding mechanism, do not forget that
the mechanism can be switched-on even manually despite of the interlock switch stop.
Keep the ventilation slots of the engine cleaned – not only from the shredded material rests
but also of all gathered garden debris – reduce the fire risk.
If for connecting the equipment to the mains the extension cable is used, it must not be lighter
than the power supply cable belonging to the equipment.
Check power supply and extension cable condition regularly (if used) for signs of damage or
wear. If there are any of them found, do not use the equipment.
Never deactivate the interlock switch.
6. SAFETY MEASURES AND
INSTRUCTIONS
WARNING! While using the electrical garden equipment, keep the preventive safety
measures to reduce fire risk, electrical shock hazard and damage to health.
IMPORTANT – Safety, health and living environment
Necessary precondition for ensuring safety while using this electrical equipment is to be
familiar with the principles of its safe operation and to follow them.
Before beginning to use this product, read this operation manual carefully and keep it for the
case of a further use.