Fieldmann FZD 4010-E - Manual (Page 13)

13
OPERATION MANUAL GARDEN SHREDDER
EN Safety measures and instructions
Be always ready!
Before the next use you need to check or repair the safety stop or any other part which is
damaged so that their proper function is ensured. Check functionality and adjustment
of all moving parts of the machine and their components. If protective guards or any
other elements with a similar purpose were damaged, let them replaced in an authorized
service station, unless otherwise specified in this manual. Let defective controls (switches)
replaced in an authorized service station as well. If they do not work properly, do not use the
equipment.
Electric shock hazard!
If not using the equipment or intending to carry out any repair or replacement of a defective
component (for instance a blade), always switch it off and remove the plug out of the socket
first!
Habit is stronger than reason!
Before re-activating the machine after a performed service work, make sure you have taken-
off just applied tools (wrenches, spanners, etc.).
Be alert!
Do not move the equipment which is energized with your finger on the switch. Before
connecting to the mains, make sure that the switch is in off position.
Use common sense!
Use common sense and do not use the equipment if you are e.g. tired at the moment!
WARNING! Using components or parts not specified/recommended in this manual
increases a risk of injury.
Contact a specialist!
This electrical equipment conforms to the related safety requirements. Leave repairs to a
competent specialist who uses original spare parts. In the opposite case you as the user are
subject to a health hazard. Do not attempt to open the cover of the tool. A respective specialist
is competent to replace the power supply cable.
Additional safety instructions
The power source voltage must correspond to voltage specified on the respective name plate
on the equipment.
It is recommended to use the shredder with a protective switch of not more than 30 mA.