Fieldmann FDV 1001-A - Manual (Page 5)

EN
CORDLESS DRILL USER'S MANUAL
4
2. MACHINE DESCRIPTION AND INCLUDED
CONTENTS
Machine description (see pic. 1)
A Keyless chuck
B Torque setting ring
C Rotation direction switch for movement forward/back and neutral position safety switch
D Trigger switch
E Handle
F Battery charge level LED display and lighting of the working area
G Battery
Machine description (see pic. 2)
1 Battery adapter
2 Charger station with battery charging indicator (point. 3, 4)
5 Battery
Supplied contents
Carefully take the machine out of the packaging and check whether all the following parts are present:
Cordless drill with battery
Battery charger station
bit - 1 pc
User's manual
If there are parts missing or they are damaged, please contact the vendor from whom you bought the machine.
3. PUTTING INTO OPERATION
Charging the machine
Proceed step by step according to the user's manual and use the pictures as a guide so that the
assembly process is as easy as possible.
1. Take the battery out of the machine, press the release button and pull down to remove the battery.
2. Place the charger on a table near a power socket.
3. Properly insert the battery into the charger.
Note: The battery may be inserted into the charger only in one way.
4. Connect the charger power cord to a power socket. At this time both the red and the green indicator
light will be on.
Machine description and included contents | Putting into operation