Fieldmann FDV 1001-A - Manual (Page 9)

EN
CORDLESS DRILL USER'S MANUAL
8 Operating instructions
Pay constant attention, watch what your are doing and think when working with power tools. Do not
use power tools if you are tired or under the infl uence of drugs, alcohol or medication. A moment of
carelessness when working with power tools may lead to serious injury.
Prevent the situation where the tool is turned on accidentally. Ensure the trigger switch is in the Off
position before connecting the power cord to the power socket. Carrying power tools with the fi nger
on the main trigger switch or connecting the power cord to the power socket when the main trigger
switch is in the On position may cause injury.
Do not get in your own way. When working, always maintain a fi rm posture and balance. This will
make it possible to better control the power tool in unexpected situations.
Use clamps or a vice to fasten the workpiece. It is safer than holding the workpiece in your hand
and at the same time you have both hands free to operate the tool.
Keep the working area tidy and well illuminated. A cluttered and badly lit work area may lead to injury.
Do not work with the power tool in an explosive environment, such as for example areas where
there are fl ammable liquid, gas or powder substances. Sparks are made inside the power tool,
which may cause the ignition of fl ammable powder or vapour.
Do not work with materials containing asbestos. Use a dust mask.
When working with the tool ensure there is a safe distance from children and other persons.
Distractions may lead to a loss of control over the tool.
Purpose of use
This tool is not designed for professional use.
Do not use the product for purposes other than those intended.
For safety reasons the machine must not be used as a drive engine for any other work tools and
tool sets, unless expressly permitted by the manufacturer.
Instructions for use
Turn on and operate the machine as described in the user's manual, carefully follow all instructions.
Before carrying out any kind of inspection, maintenance or repairs disconnect the charger power
cable from the mains power supply.
Use tools in good working condition for tasks for which they are designed.
Work only during good visibility or ensure suffi cient artifi cial lighting.
Work in a clean and tidy working environment.
Make sure that while working you maintain a fi rm and stable stance. Do not forget that falls represent
one of the major causes of injuries during accidents.
When drilling metal sheets use a vice and place a piece of wood underneath the sheet. A rotating
metal sheet presents a serious risk.
Make sure that the drill or screwdriver are not used for work on items under live current, to prevent
injury by electrical shock. Before using this tool, check that you know the location of all electrical
conductors or cables in the wall (use a metal detector for this purpose).
Only store and use the product away from fl ammable or volatile materials and solutions.
Keep the product away from extreme temperatures, direct sunlight and excessive humidity. Do not
use in a dusty environment.
Do not place the product near heaters, open fi res or other appliances or equipment that are sources
of heat.