Flyzone FLZA3004 User Manual
Page 20
20
Some replacement parts are sold as assemblies (such as
the wing). If the servos in your crashed wing (or fuselage) are
still functioning you can remove them, peel off any excess
glue, then glue them into your new wing or fuselage—CA is
suitable for gluing in servos, but something pliable such as
canopy glue or Shoe Goo is recommended. When gluing the
bottom panel cover into the wing, use care not to get excess
glue in the wing tube channel.
To remove the motor, fi rst remove the spinner screws with a
Phillips screwdriver, then remove the folding propeller bracket
with a 1.5mm hex key wrench. Then disconnect the motor wires
and unscrew the mounting screws from inside the fuselage
and the motor will come out the front.
This model belongs to:
Name
Address
City
, State
, Zip
Phone Number
AMA Number