Flyzone FLZA3004 - Manual (Page 8)

8
Right Rudder
Up Elevator
❏
12. Be certain the elevator and rudder respond in the correct
directions according to the stick movements on the transmitter.
If necessary, use the servo reversing in the transmitter to get
the controls to respond correctly.
❏
13. Disconnect the battery and turn off the transmitter.
Optional Flaps
In addition to the servos, linkages and servo wire extensions
listed under “Items Required for Completion” in the front of
the instruction manual, a minimum 5-channel transmitter is
also required to operate the fl aps.
You may do one wing fi rst and then the other, or work on
both wings at the same time.
❏
1. Cut the fl ap from the aileron.
❏
2. Cut along the molded line to open the servo mount.