Flyzone FLZA4300 - Manual (Page 6)

6
❏
8. Mount the landing gear to the fuselage using four
3x16mm self-tapping screws.
❏
9. Unscrew the bottom half of the nose wheel pant.
❏
10. Insert the nose wheel axle through the nose wheel and
fi t it into the grooves in the lower nose wheel pant. Replace
the lower nose wheel pant and screw it back into place.
❏
11. Slide the left horizontal stabilizer onto the fuselage.
Align the plastic fi ttings into their mating slots in the fuselage
and press the stab half against the fuse until fully seated.
❏
12. Install the right horizontal stabilizer in the same
manner. Thread a 2.5x8mm self-tapping screw into each
stab mounting hole and tighten them securely.