Flyzone FLZA3300 - Manual (Page 3)

3
6. You must check the operation of the model before every
fl ight to ensure that all equipment is operating and that the
model has remained structurally sound. Be sure to check
clevises or other connectors often and replace them if they
show any signs of wear or fatigue.
7. If you are not an experienced pilot or have not fl own
this type of model before, we recommend that you get
the assistance of an experienced pilot in your R/C club for
your fi rst fl ights. If you’re not a member of a club, your local
hobby shop has information about clubs in your area whose
membership includes experienced pilots.
8. While this kit has been fl ight tested to exceed normal use,
if the plane will be used for extremely high stress fl ying, such
as racing, or if a motor larger than one in the recommended
range is used, the modeler is responsible for taking steps to
reinforce the high stress points and/or substituting hardware
more suitable for the increased stress.
We, as the kit manufacturer, provide you with a top quality,
thoroughly tested kit and instructions, but ultimately the
quality and fl yability of your fi nished model depends
on how you build it; therefore, we cannot in any way
guarantee the performance of your completed model,
and no representations are expressed or implied as to the
performance or safety of your completed model.
Remember: Take your time and follow the instructions to
end up with a well-built model that is straight and true.
TOOLS REQUIRED
The Switch Trainer EP RTF requires only AA batteries and
common household tools to fi nish assembly:
❍ (4) AA batteries (FUGP7300)
❍ #2 Phillips screw driver
❍ Slotted screw driver
IMPORTANT BUILDING NOTES
●
Photos and sketches are placed before the step they
refer to. Frequently you can study photos in following
steps to get another view of the same parts.
● The stabilizer and wing incidences and engine thrust
angles have been factory-built into this model. However,
some technically-minded modelers may wish to check
these measurements anyway. To view this information visit
the web site at www.hobbico.com and click on “Technical
Data.” Due to manufacturing tolerances which will have
little or no effect on the way your model will fl y, please
expect slight deviations between your model and the
published values.
KIT INSPECTION
Before starting to build, take an inventory of this kit to make
sure it is complete, and inspect the parts to make sure they
are of acceptable quality. If any parts are missing or are not of
acceptable quality, or if you need assistance with assembly,
contact Product Support . When reporting defective or
missing parts, use the part names exactly as they are written
in the Kit Contents list on this page.
Hobbico Product Support Ph: (217) 398-8970 ext. 5
3002 N Apollo Drive Suite 1 Fax: (217) 398-7721
Champaign, IL 61822
E-mail: [email protected]
ORDERING REPLACEMENT PARTS
Replacement parts for the Hobbico Switch Trainer EP are
available using the order numbers in the
Replacement
Parts List that follows. The fastest, most economical service
can be provided by your hobby dealer or mail-order company.
Parts may also be ordered directly from Hobby Services, but
full retail prices and shipping and handling charges will apply.
Illinois and Nevada residents will also be charged sales tax.
To locate a hobby dealer, visit the Hobbico web site at www.
hobbico.com. Choose “Where to Buy” at the bottom of the
menu on the left side of the page. Follow the instructions
provided on the page to locate a U.S., Canadian or
International dealer.
Parts may also be ordered directly from Hobby Services by
calling (217) 398-0007, or via facsimile at (217) 398-7721,
but full retail prices and shipping and handling charges will
apply. Illinois and Nevada residents will also be charged
sales tax. If ordering via fax, include a Visa
® or MasterCard ®
number and expiration date for payment.
Mail parts orders Hobby Services
and payments by 3002 N Apollo Drive, Suite 1
personal check to: Champaign IL 61822
Be certain to specify the order number exactly as listed in
the
Replacement Parts List . Payment by credit card or
personal check only; no C.O.D.
If additional assistance is required for any reason contact
Product Support by e-mail at [email protected],
or by telephone at (217) 398-8970.
SUCCESS GUARANTEE
We are so confi dent that the Switch is the best ready-to-
fl y trainer available that we make this guarantee: You will
successfully learn to fl y with the Switch or we will replace it
with your choice of any Flyzone trainer of up to equal value.
All we ask is that you train with the Switch in its high-wing
confi guration, under the supervision of a qualifi ed, club-
designated instructor; follow normal safety precautions; fl y
at an AMA-chartered club; and construct the kit as outlined
in the included instruction manual.
If you crash your Switch before completing your fl ight training
despite following the conditions outlined above, contact
Hobby Services, Monday through Friday, 9AM to 5PM
Central time, to request a replacement. You must verify that
all terms and conditions of the fl ight guarantee have been
met, as follows: