Flyzone HCAA27 - Manual (Page 6)

6
❏ 3. There are three components for the main
landing gear. The landing gear wire, the main
landing gear retaining plug and two 2.5mm x 8mm
sheet metal screws. Slide the landing gear wire into
the slot in the fuselage. Insert the main landing
gear retaining plug into the slot. Then, secure it
with the two screws.
INSTALL THE WINGS
❏ 1. Begin with the bottom wing (the bottom
wing has the black stripe decals). Slide the dowels
on the leading edge of the wing into the holes in
the fuselage.
❏ 2. Press the wing onto the fuselage and secure it
with the 3mm x 15mm sheet metal screw. The screw
should be tight enough to hold wing snug against
fuse, yet not crush the wing. Do not overtighten.