Flyzone HCAA27 - Manual (Page 7)

7
❏ 3. Repeat these steps to install the top wing. The
top wing should be secured with a 3mm x 18mm
sheet metal screw.
❏ 4. Making sure the curvature on the ends of the
strut match the curvature of the wing, slide one of
the plastic wing struts into the slot in the bottom,
left wing and the slot in the top, left wing.
❏ 5. Slide the strut locking ring over the tab
extending through the wing from the strut. Rotate
the locking ring ¼ turn so the tab on the strut
aligns with the tabs on the locking ring.
❏ 6. Repeat this for the right wing.