Flyzone FLZA2900 - Manual (Page 5)

Remove end caps.
OR
USB port on
transmitter
USB port on
alternative source
Plug charger into USB socket.
A very small, blinking red light
should appear.
Place battery on charge terminals.
A large, solid red light will appear,
indicating charging. When the
light turns off, charging is complete.
Remove the battery from the
charger and the charger from the
power source. Replace the caps
on the charger.
Illuminated red light
indicates the transmitter is
powered and transmitting.
The MIX dial should be in
position 2 to operate the
Uberlite Monoplane and
Biplane. Position 0 is
required to operate the
optional flying wing.
5
CHARGE THE INCLUDED LIPO BATTERY
POWER THE TRANSMITTER
Do not use the charge feature while flying the Uberlite!
Keep the left control stick in the minimum position during set up.