Futaba 10CG 2.4GHz User Manual
Page 105
105
HIGH/LOW PITCH (HI/LO-PIT):
7KLVIXQFWLRQPD\EHXVHGWRDGMXVWWKHFXUYHVKLJKDQGORZVLGHLQGLYLGXDOO\IRUHDFKÀLJKWFRQGLWLRQ QRUPDOLGOHXS
idle-up 2, idle-up 3, throttle hold).
Adjustability:
<RX PD\ GH¿QH KLJK DQG ORZ VLGH UDWH WULP NQREV WKH KLJK VLGH SLWFK WULP
FRQWUROLVGH¿QHGDVWKHULJKWVLGHOHYHUDWLQLWLDOVHWWLQJ
• The conditions are activated in the CONDITION SELECT function (p.100).
• Both adjustments may be set to MANUAL, temporarily turning off the knob.
• Adjustments may be memorized and then return the knobs to center point to
use that amount of adjustment. Allows easy use of the trimming knobs for
multiple models.
GOAL of EXAMPLE:
STEPS:
INPUTS:
Set up a high pitch curve in the idle-up
1 condition.
6WRUHQHZVHWWLQJVDIWHUÀLJKW
Open the HI/LO-PIT function.
for 1 second.
(If BASIC,
again.)
C
to HI/LO-PIT.
Select the idle-up 1 condition.
C
to NORM.
to IDL1.
Set the rate. (Ex: 80%)
C
to HI-PIT.
to 80%.
Optional: change which knob adjusts
high pitch curve.
C
to VR.
to desired knob and direction.
Store the current dial settings prior to
selecting another model.
C
to HI-PIT.
for one second to store.
or
VR(E) to center.
Close.
Where next?
PIT-CURVE
: see p. 100.
HOV-PIT
: see p. 104.