Futaba 10CG 2.4GHz User Manual

Page 30

Advertising
background image

30

$/22.$77+(5$',2 6)81&7,21667(3%<67(3

MODEL

submenu: includes three functions that manage model memory: MODEL SELECT, MODELCOPY and MODELNAME. Since

these functions are all related, and are all basic features used with most models, they are together in the MODEL submenu of
the BASIC menu.

NOTE: When you choose a new model in the MODEL SELECT function, if the new
model is set to a different modulation, you must cycle the transmitter power to change
PRGXODWLRQV,I\RXGRQRWF\FOHWKHSRZHUWKHPRGXODWLRQW\SHZLOOÀDVKRQWKHKRPH
screen to remind you. Please note: You are still transmitting on the other modulation
until you affect this change.

GOAL:

STEPS:

INPUTS:

Select Model #3.

N O T E : T h i s i s o n e o f s e v e r a l
functions for which the radio requires
FRQ¿UPDWLRQWRPDNHDFKDQJH

Open BASIC menu, then open MODEL
submenu.

for 1 second.

(If ADVANCE,

again.)

C

if required to MODEL.

Choose Model #3.

to 3.

&RQ¿UP\RXUFKDQJH

for 1 second.

Are you sure?

displays.

Close.

Confirm proper modulation of new
model memory.

If 2.4G

LVÀDVKLQJLQWKHXSSHUULJKWKDQGFRUQHUWKHQWKHQHZPRGHOLVVHWIRU

WKHRWKHUUHFHLYHUW\SH7XUQWKHWUDQVPLWWHURIIRQWRFKDQJHWKHPRGXODWLRQ

Where next?

NAME

the model: see p. 32.

Change MODEL TYPE (aircraft, heli, glider): see p. 34.
Change modulation (2.4G-10CH or 2.4G-7CH): see p. 35.
Utilize servo REVERSE: see p. 38.
Adjust END POINTs: see p. 39.
Set up IDLE-DOWN and THR-CUT for throttle management: see p. 40, 41.

MODEL SELECT

: This function selects which of the 15 model memories in the

transmitter (or 33 in the optional CAMPac-

.  WR VHW XS RU À\ )RU FODULW\

the model's name and an image of its type are indicated after its number. (Each
model memory may be a different model type from the other memories.)
Note: If you are using the optional CAMPac-16K, your choices in MODEL
SELECT

and MODEL COPY will include 16-33, which are the model memories in

the CAMPac. You do not have to COPY from the CAMPac to the transmitter
prior to working with that model.

T9C/T9CS CAMPac data conversion

Although the CAMPac

 GDWD WKDW KDV EHHQ VDYHG DV WKH GDWD RI D FRQYHQWLRQDO 7&7&6

transmitter cannot be used directly, it is possible to use it by the following method. Copying
the information to the model memory of a T10C transmitter. When using the CAMPac, the
information will be displayed. For example, as "01<-Pac 01." Press DIAL for 1 second in
this state and the check display of "Are you sure?" will appear. Press DIAL again, the data of

CAMPac will be copied to model number"01" of the T10CG transmitter. As for the data of the function added by T10CG,
DQLQLWLDOYDOXHLVVHWXSDWWKLVWLPH3OHDVHGRQRWIRUJHWWRFKHFNWKHVHWWLQJVEHIRUHÀ\LQJ
In addition, refer to p.17 for the initializing method of the CAMPac.

T10CG/T10C CAMPac data compatibility
The CAMPac data saved from a T10CG or conventional T10C transmitter can be used directly by a T10CG and T10C
transmitter. As for the data of functions added by the T10CG:
(T10C data -> T10CG): an initial value is set up at this time.
(T10CG data -> T10C): the function doesn't work regardless of the data.

ÀDVKLQJ

Advertising