Futaba 10CG 2.4GHz User Manual
Page 94
94
GOAL of EXAMPLE:
STEPS:
INPUTS:
Change the MODEL TYPE and SWASH
TYPE
of model #3 from aircraft to 120
degree CCPM with 2 servos working in
unison for collective pitch and aileron
[HELI(HR3)].
Confirm you are currently using the
proper model memory. (example: 3)
On home screen, check model name and
# on top left.
If it is not the correct model (example:3),
see MODEL SELECT, p. 25.
Open PARAMETER submenu.
for 1 second.
(If ADVANCE,
again.)
to 2nd page of menu.
C
to PARAMETER.
Select proper MODEL TYPE.
(HELICOPTER)
&RQ¿UPWKHFKDQJH
C
to TYPE.
to HELICOPTER.
for 1 second.
Are you sure?
displays.
WRFRQ¿UP
1
Change to the desired SWASH TYPE
(example: HR3.)
&RQ¿UPWKHFKDQJH
C
to SWASH.
to HR3.
for 1 second.
Are you sure?
displays.
WRFRQ¿UP
Close.
Where next?
If a single servo is not operating properly, REVERSE: see p. 38.
If a control is operating backwards (i.e. Elevator), see SWASH AFR, p. 95.
If unsure see SWASH AFR.
1
Radio emits a repeating “beep” and shows progress on screen as the model type is being changed. Note that if the power switch is turned off prior to
completion, the model type will not be changed.