Futaba 14MZ - Manual (Page 71)

●Return to Linkage Menu
● Touch the [Data Reset] button in the Linkage Menu
to call the setup screen shown below.
Data Reset Model memory setting data reset. (by item)
This function is designed to allow you to reset
selected portions or all of the settings saved in
the active model memory. You may individually
choose to reset the following sets of data;
T1~T6, CD:
Reset the digital trim setting.
*All the conditions, or the condition currently being displayed
(the entire group for group setting), can be selected.
Direct key:
Resets direct key assignment.
Data Resetting
1. Touch the desired button to reset the set of
data.
2. Perform the data resetting according to the
instructions displayed on a screen. When
complete, touch the Data Reset button to
exit.
Model menu setting:
Resets all the functions in the Model Menu
except Condition Select.
All model setting:
Resets all Linkage and Model Menu functions
except for Frequency, Model Select, and Model
Type.
71 <Linkage Menu>