Philips AJ3840/10M - Manual (Page 3)

Cassette Playback Alarm
CASSETTE PLAYBACK SETTING THE ALARM
• Press the RADIO CASSETTE ON button (4) to
switch on the radio and the cassette to standby
mode.
• Open the cassette door
manually and insert a
cassette tape into the
compartment. For playback,
any cassette type can be
inserted.
• Close the cassette door.
• Press ► PLAY and the radio will automatically
switch off.
- Playback will start
- Playback stops when the tape in the cassette
deck reaches the end.
- .The radio will automatically switch on.
• You may connect stereo headphones with 3.5
mm plug to the socket 0 PHONES ®. The
loudspeaker is then muted.
• Adjust the sound with the VOLUME control @
if needed.
• Press ■ STOP @ if you want to stop the
playback before the end of the tape.
- When the end of the tape is reached, the
► PLAY @ button is released automatically and
the radio is switched on.
• Press OFF button ® to switch off the radio.
Winding the tape
• Press ►► FORWARD ® button to fast forward
the tape.
• Press ** REWIND @ button to fast-rewind the
tape.
• Press ■ STOP ® to stop fast-forward or fast-
rewind, or before the end of the tape.
Alarm time
You may set two different alarm times with this
clock radio. This can be useful if you need to be
woken up at different times during the week or at
the weekend.
Setting alarm time 1
• Set ALARM 1 Mode Selector @ to the
'RAD/CASS' or 'BUZZ' position and ALARM 2
Mode Selector ® to the 'OFF' position:
- BUZZ - to be woken up by the buzzer
or
- RAD/CASS - to be woken up by the
radio/cassette.
- * ALARM 1 indicator ® lights up on the
display.
• Press ALARM button ®
- The clock display shows ALARM 1 time.
• Press ALARM button ® and '+' ® or®
simultaneously. The alarm time display will
change. Release '+' ® or'-' ® when the
desired alarm time appears on the display.
Setting alarm time 2
• Set ALARM 2 Mode Selector ® to the
'RAD/CASS' or 'BUZZ' position and ALARM 1
Mode Selector @ to the 'OFF' position:
- BUZZ - to be woken up by the buzzer
or
- RAD/CASS - to be woken up by the
radio/cassette.
- # ALARM 2 indicator @ lights up on the
display.
• Press ALARM button ®
- The clock display shows ALARM 2 time.
• Repeat the above procedure to set the time for
ALARM 2
Notes:
• If the time and the alarm time met while
setting the ALARM time, you can switch off
the buzz/radio by pressing OFF button ®.
- Continue setting the alarm as per normal.
• The alarm time will not appear on the display
when:
- Both the ALARM 1 and ALARM 2 Mode
Selectors are set to the 'OFF' position.
- Both the ALARM 1 and ALARM 2 Mode
Selectors are set to the 'BUZZ' or
'RAD/CASS' position.
• When setting the alarm time, always release '+'
® or'-' ® first before releasing the ALARM ®
button.
?
Ill