Philips CCX092AT - Manual (Page 47)

Specifications I Glossary 47
Specifications
General
CRT: 9-inch in line gun
Television system: NTSC-M
Closed caption system: Section 15.119, FCC
(Federal Communications Commission) Standard
Video Heads:Two heads
Tape v/idth: 1/2 inch (12.65 mm)
Tape speed
SP: 33.35 mm/sec.
LP: 16.67 mm/sec.
SLP: i 1.12 mm/sec.
OperatingTemperature:4rF (5“C) to I04T (40"C)
Relative Humidity: i 0% to 75%
Power requirement; AC I20V/DC I3.2V, 60Hz
Power consumption: 65W(AC/DC)
Sound output: 0.8W
Dimensions;
12-7/8" (H)x 11-13/16" (W)x 12-13/16" (D)
328 mm x 300 mm x 328 mm
Weight 18.7 lbs (8.5 kg)
Tuner Broadcast Channels
VHF2-I3,UHF 14-69
Cable TV Channels
2- 13
Mldband;A- 1
Superband: J -W
Hyperband:A-5 -A-1
Special Channel: 5A
Ultraband: 37-94.100-125
Terminals
Antenna 1N:VHF/UHF 75 ohms unbalanced
Video IN: RCA connector
Audio IN; RCA connector
Earphone: 3.5 mm CES
Electrical Specifications
Video input level: 0.5-2.0Vp-p
Audio input level:-lOdBv
Video S/N ratio
SP: More than 42dBiJ
Audio S/N ratio
SP: More than 38dB
Designs and spedficatJons are subject to change without
notice and without our legal obligation.
Glossary
AUDIO lack: jack located on the front of the
TV/VCR which is used to record audio from anoth­
er source.
Automatic Channel Programming: process in
which die TV/VCR scans all available channels and
places the ones you receive in its memory.Then,
when you push the CHANNEL (Up/Down) buttons,
you only scan through channels you receive.
Bands: settings that allow you to tune channels.
• Antenna — VHF (very high frequency: channels 2
- 13) and UHF (ultra high frequency: channels 14 -
69).
• Cable - all standard channels can be received
without a Cable Box.
Brightness: adjusting increases or decreases the
brightness of the color on-screen.
Color adjusting pales or brightens the TV/VCR color.
Dubbing: copying a tape using aVCR.
HO: high quality a feature in the TV/VCR circuitry
which provides enhanced picture detail.
Line Input: The channel to which you set your
TV/VCR during dubbing.The line input channel Is
always channel 00 (A/V IN).To exit line input mode,
press the CHANNEL Up/Down buttons or the
Number buttons to select another channel.
Mode: a TV/VCR operation.
OTR: one touch recording; programming a timed
recording that starts immediately and records for
30 minute to eight hours, whichever you specify.
Picture: adjust to Increase or decrease the con­
trast of the picture on-screen.
Sharpness: adjusting softens or clarifies the picture
on the TV screen.
Tape Speeds: how fast the tape travels during
playback or a recording.
• SP (standard play) - fastest tape speed (record­
ing time for aTI20 tape is approximately two
hours); best picture quality.
• LP (long play) - average tape speed (recording
time for aT120 tape is approximately four
hours).
• SLP (super long play) - slowest tape speed
(recording time for aTI20 t^e is approximately
six hours).
Tint: adjusting changes the tints of the picture on the
TV/VCR from purple to green.
VCR: video cassette recorder.
VIDEO lack: jack located on the front of the
TV/VCR which is used to record video from anoth­
er source.