Cassehe recorder, Playing a cassette, General information on recording – Philips AZ 1203 User Manual

Page 12: Cassette recorder -13, Platine cassette -25

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CASSEHE RECORDER

Playing a cassette

1 Set the POWER slider to TAPE.

2 Press STOP-OPEN QA to open the cassette compartment.

3 Insert a recorded cassette with the open side upwards and close

the cassette compartment.

4 Press PLAY <! to start playback.

5 Press» or ■« to rewind or fast forward the tape.

6 To stop the tape press STOP-OPEN OA.

Note: The keys are released at the end of the tape.

General information on recording

Recording is permissible insofar as copyright or other rights of

third parties are not infringed upon.

For recording on this set you should use a cassette of the type

NORMAL (lEC type I). This deck is not suitable for recording on

cassettes of the type CHROME (lEC type n) or METAL (lEC

type IV|.

The recording level is set automatically. The controls VOLUME and

DBB do not affect the recording.

At the very beginning and end of the tape, no recording will take

place in the 7 seconds during which the leader tape passes the

recorder heads.

Protecting tapes from accidental erasure

Keep the cassette side to be protected in front of you and snap off

the left tab. Now, recording on this side is no longer possible.

To record again on this side of the cassette, cover the aperture

with a piece of adhesive tape.

12

Advertising
This manual is related to the following products: