Philips AZ 1203 - Manual (Page 8)

RADIO
m
3
<a^
w*
Tuning to radío stations
1 Set the POWER slider to TUNER.
2 Select the wave band by using the BAND selector.
-* Display indication: the selected waveband.
3 Press SEARCH km or t>w for approx. 1 second and then release
the button.
The radio automatically tunes to a station with sufficient
4 Repeat this procedure until you find a station you desire.
To tune to a weak transmitter briefly press SEARCH km or w» as
often as necessary for optimum reception, or until the correct
frequency is indicated in the display.
Programming radio stations (29 preset stations)
You can store up to 29 radio stations in the memory. When
tuning to a preset station, the preset number (1 to 29) is indicated
in the display.
1 Set the POWER slider to TUNER.
2 Press PROGRAh/l to enter the programming mode.
During programming, program flashes on the display.
3 Tune to a desired station with SEARCH km or t>t>t, as described
earlier (see "Tuning to radio stations").
-* If the frequency is already stored in the memory, the preset
number will be displayed.
4 Press PRESET V or A to allocate a number from 1 to 29 to the
preset station.
5 Press PROGRAM to confirm the setting.
Tuning to preset stations
Press PRESET V or A until the desired preset number appears
on the display.