Cisco 10700 - Manual (Page 8)

5-8
Cisco 12000/10700 v3.1 Router Manager User Guide
OL-3865-01
Chapter 5 Managing Modules
Module Fault Management
Module Fault Management
The Module Fault Management window is a read-only window and provides fault information for a
selected module. You do not need to enter any information into any of the fields. This section provides
the following information:
• Viewing the Module Fault Management Window
• Module Fault Management Window—Detailed Description
Viewing the Module Fault Management Window
To view the Module Fault Management window, proceed as follows:
Step 1 Right click on a module and select the Cisco 12000/10720 Manager>Fault>Module Fault
Management option. Refer to
Table 5-2 on page 5-2 for information on which objects allow you to
launch the Module Fault Management window. The Module Fault Management window appears, with
the Fault Management tab displayed:
Figure 5-4 Module Fault Management Window
Step 2 Choose a Chassis and Module from the list boxes at the left of the window. The fault management
information for the selected module appears. For detailed information on the areas within this tab, refer
to the
“Module Fault Management Window—Detailed Description” section on page 5-9 .