Projector user commands – Canon SX 50 User Manual
Page 234
Advertising
Projector User Commands
- 228 -
Revision History / Date
Changes
Revised by
Approved by
* Error codes are 4-digit hexadecimal strings. X represents any character from 0 to 9 or from A to F.
* Items with lower numbers have a higher priority. (Even when multiple errors have occurred, the error with the highest rank is returned. However, errors
of the same item number are ranked with the same priority.)
* Given below is the correspondence between the numbers (1) to (4) in the "Errors supported by model" column and the models concerned.
(1) SX50
01.00**
SX6 01.0100
SX60 01.0100
(2)
X600 01.0100
SX6 01.0111
SX60 01.0111
X600 01.0111
SX7 01.0111
(3)
SX700 01.0111
(4) SX7
Mark
II
01.0222
Advertising