Future Retro Zillion Owner Manual - Manual (Page 13)

LOOP
A loop point will cause the internal counters to reset, limiting the number
of steps a pattern will play before repeating.
The loop point can range from 1-16 beats, 1, 2, 4, 8, 16, 32, or 64 Bars.
The loop point can be deactivated by selecting FRE (free running).
Notice that values for beats are followed by a lower case “b”. Values for
Bars are followed by an upper case “B”.
Each of the four soft keys can be used to select a different value for the
Loop. This allows you to instantly jump to different loop values. The
active loop value will be indicated with a triangle next to the value.
The active loop value can be adjusted at any time using the +/- keys.
While holding any soft key you can then edit the loop value using the +/-
keys, or the touch pad. The new loop will take affect when the soft key is
released, and the current loop point is reached.