Future Retro XS - Manual (Page 61)

SPECIFICATIONS
MIDI
Channel: 1-16
MIDI Messages Recognized: pitch C2 to C7, Note On/Off, Pitch Bend -/+ 2 semitones, Velocity, Mod
Wheel, MIDI clock
LFO
Waveshapes: triangle, saw, square, random
Free Running Rate: (MIDI SYNC off) 4 seconds to 18 Hz
MIDI Clock Divisions: (MIDI SYNC on) 8 bars, 4 bars, 2 bars, 1 bar; 1/2, 3/8, 1/3, 1/4, 3/16, 1/6, 1/8,
3/32, 1/12, 1/16, 1/24, 1/32 note divisions
OSCILLATOR A
Total Frequency Range: 0.5 Hz to 100 kHz
Octave Control Range: 6 octaves
Fine Tune Control Range: -6 to +6 cents (master fine tuning for both oscillators)
Waveforms: saw, square, white noise, external audio
OSCILLATOR B
Total Frequency Range: 0.5 Hz to 100 kHz
Oscillator Sync: on/off
Octave Control Range: 12 octaves
Frequency Control Range: -9 to +9 semitones
Waveforms: sine, triangle, saw, square/pulse width
Pulse Width Modulation Amount: typically 50% to 3%
Pulse Width Modulation Source: external source, LFO, Mod Wheel, manual adjust, Velocity,
Envelope 1
WAVE C
Waveforms: 1/8, 1/4, 1/2 sub oscillators, ring modulator, white noise, external audio
OSCILLATOR MODULATION
Modulation Sources for Oscillator A: external source, LFO, LFO controlled by Mod Wheel, Mod
Wheel, Waveform B, Waveform B controlled by Envelope 1, Envelope 1 positive and negative polarity.
Modulation Sources for Oscillator B: external source, LFO, LFO controlled by Mod Wheel,
Mod Wheel, Velocity, Waveform A, Waveform A controlled by Envelope 1, Waveform C, and
Envelope 1 positive polarity
MIXER
Controls: level A, level B, level C (all capable of overdriving filter input)
FILTER
Filter Types: (12 dB) lowpass, bandpass, highpass, notch
Filter Frequency Range: 5 Hz to 18 kHz
Resonance: 0 to self oscillation
Overdrive: clean to fully crunch
59