Galaxy Audio HDR2 - Manual (Page 4)

5. In order to keep stable data transmission, please do not twist the USB cable when you
plug it into the computer.
6. The built-in LCD display is a fragile electronic part, please do not press on it and do not
touch it with sharp objects. We suggest you use only a special cloth to clean the LCD
display. Please make sure that the LCD display does not get exposed to water.
7. The SD card is a very precise electronic device, please use it according to the following
notice: Do not take the SD card out of the HDR2 during data transmission. Do not bend,
strike, drop or take apart the SD card. Do not place the SD card in a place with high
temperature, high humidity or dust. Do not expose the SD card to static electricity. In
addition:
l Please make sure the SD card you are using has been formatted (the format type of
the HDR2 is FAT32).
l
Please release the write protection switch of the SD card before you record.
l The HDR2 processes large amount of data during recording and playback. We strongly
suggest you use high speed SD cards only, to prevent noise, data loss or any
transmission problems.
We do not guarantee the function, operation or life of any SD card that is used in the device. We
also do not take any responsibility for the damage of SD cards. Like any digitally stored
data, it should be backed up regularly.
3. Parts Description (Switches, Connectors, and Buttons)
Switches and connectors on the HDR-2
G A L A X Y A U D I O
HANDHELD DIGITAL
RECORDER
HDR2
1. Built-in microphone “L “channel: an omni condenser microphone is installed into the
device as “L” channel.
2. Built-in microphone “R” channel: an omni condenser microphone is installed into the
device as “R” channel.
2