Galaxy Audio DHT-QUAD - Manual (Page 9)

Handheld
Transmitter Bodypack
Transmitter
Receiver Programming
System Setup System Setup
1
2
3
1
2
3
4
5
GROUP CHANNEL
ANTENNA
A B
GROUP
SELECT
SELECT SELECT
CHANNEL CONTROL
AUTO VOLUME MANUAL
CHANNEL FREQUENCY
DISPLAY
MHz
SELECT LIST
EXIT
MASTER
GROUP CHANNEL
ANTENNA
A B
GROUP
SELECT
SELECT SELECT
CHANNEL CONTROL
AUTO VOLUME MANUAL
CHANNEL FREQUENCY
DISPLAY
MHz
SELECT LIST
EXIT
MASTER
GROUP CHANNEL
ANTENNA
A B
GROUP
SELECT
SELECT SELECT
CHANNEL CONTROL
AUTO VOLUME MANUAL
CHANNEL FREQUENCY
DISPLAY
MHz
SELECT LIST
EXIT
MASTER
GROUP CHANNEL
ANTENNA
A B
GROUP
SELECT
SELECT SELECT
CHANNEL CONTROL
AUTO VOLUME MANUAL
CHANNEL FREQUENCY
DISPLAY
MHz
SELECT LIST
EXIT
MASTER
GROUP CHANNEL
ANTENNA
A B
GROUP
SELECT
SELECT SELECT
CHANNEL CONTROL
AUTO VOLUME MANUAL
CHANNEL FREQUENCY
DISPLAY
MHz
SELECT LIST
EXIT
MASTER
Group and Channel Selection:
Press “SET” button twice, “GROUP SELECT” will display,
press or to choose the appropriate frequency group.
Press “SET”again , “ MANUAL CHANNEL SELECT” will display ,
press or to choose the appropriate channel.
For best results when operating multiple systems, set all systems to
a single group, then set each system to a unique channel within that
group.
Auto Frequency Finder function on the Receiver:
Choose “AUTO CHANNEL SELECT” by pressing “SET” once,
then press or . Receiver will automatically find a clear
frequency with no interference.
Receiver Volume Setting:
The receiver has an electronic volume control. Press or
from the normal display (00 to 63)
Normal Display:
Frequency and Antenna A/B (RF Received).
Transmitting frequency automatic setup:
Place the Transmitter “IR” window to face the Receiver “IR” window.
Then press the “ASC” button on the desired Receiver. The Transmitter
will automatically match the Receiver frequency.
Attention: The distance between the Receiver and Transmitter
IR windows should be less than 0.5m during the ASC IR setup. When
setting up multiple Transmitters/Receivers, activate the ASC function
of only one Transmitter and Receiver at a time.
1
2
3
4
5
MBP76 Transmitter Status Display
Battery Status:
Battery Status Indicators for both the Handheld and Bodypack
Transmitters feature Four Level Displays.
Group and Channel Display:
After completing the ASC, both the Handheld and Bodypack
Transmitters will display the Group and Channel numbers selected.
Normal Display:
Both Handheld and Bodypack Transmitters will display Group and
Channel numbers as well as Battery Status.
1
2
3
7