Garelick 19874 GULL WING STEP LADDER - Manual (Page 2)

Installation Instructions –
Models 19853/19854/19873/19874 “Gull Wing Step” Boarding Ladder
Form 12.539
Rev. A
OPERATING INSTRUCTIONS
Refer to Fig. 2 and Fig. 3
1. Both the 3- and 4-step ladders open in a similar fashion.
2. Rotate one of the steps counter-clockwise to open the ladder.
3. Rotate one of the steps clockwise to close the ladder.
4. To adjust the angle of the ladder with respect to the mounting
surface, remove nut and bolt “F” and adjust the angle for comfort
and ease of use.
99194 OPTIONAL STORAGE BRACKET MOUNTING INSTRUCTIONS
Refer to Fig. 4 (“E” – Storage Bracket, part #06.348, qty. 2)
1. Place mounting brackets “E” in desired location. Mark mounting
holes using the brackets as a template. Remove brackets.
2. Drill appropriate holes for fastener selected (not included).
3. Make sure fastener head is recessed in mounting block so as not
to interfere with the hanging of the ladder.
4. Secure ladder in position using clevis pin.
(NOTE: Do not remove clevis pin from lanyard.)
FIG. 3
FIG. 4
C
Swivel Flange Top
C
A
B
F
E
D
FIG. 2
NO JUMPING! NO DIVING!
SAFETY
INSTRUCTIONS
■ DO NOT USE WHEN MOTOR
IS RUNNING.
■ THIS LADDER DESIGNED
FOR BOAT USE ONLY.
■ FACE BOAT WHEN
ENTERING BOAT OR WATER.
■ ONLY ONE PERSON ON THE
LADDER AT A TIME.
■ CHECK ALL STEPS AND
HARDWARE BEFORE USING.
WARNING