Garelick 31600 OUTBOARD MOTOR CARRIER - Manual (Page 3)

Assembly Instructions for:
31600 Motor Carrier
PO Box 8, 644 2 nd Street
St. Paul Park, MN 55071
Form 12.121
Phone: (651) 459-9795
E-mail: [email protected]
On the Web: www.garelick.com
Revision Date: 08/07
Page 3
Step 8:
Attach handle brace (tube with rounded ends) across
top. Insert bolts and finger tighten fasteners.
Drape tank tie straps over wood block so loops are
above holes.
Step 9:
Position tank holder U tube as shown.
NOTE: Place tank holder on inside of main upright
tube. U opens out facing forward.
Insert bolts and finger tighten fasteners.
***Step 10: Tighten all fasteners on carrier.***
Finished Assembly:
Maintenance:
Periodically lubricate wheels and polish** aluminum to
ensure a long life.
NOTE: Recommended for motors 1-30 h.p./130 lbs.
**EEz-In marine polish, Model 65010, available.
Fasten
Fasten
Strap