Step 2- attaching the rain fly, Step 3- extra stability in windy conditions – Giga Tent FT 027 User Manual

Page 3

Advertising
background image

Step 2- ATTACHING THE RAIN FLY

9) Open the rain fly and insure it is upside down.
10) Insert Center Fly Pole into pole pockets of rainfly (Figure G).
11) Tie the inside of fly the Center Fly Pole (Figure H).
12) Thread Side Fly Poles through thepole sleeves located at the left and right sides of the rain fly (Figure I).
13) Drape the rain fly over the tent body right side up (this will be easier with 2 people).
14) Insert protuding Side Fly Poles into the rings on the nylon strips (part of pole clips) (Figure J).
15) Attach Velcro from bottom side of fly to steel poles (Figure K).
16) Attach the bungee cords of fly to the ring at the bottom of each corner of tent using the hook provided (Figure L).

Step 3- EXTRA STABILITY IN WINDY CONDITIONS

15) In windy conditions use the extra stakes and guylines to add extra stability (Figure M).

ATTACHING RAIN FLY DIAGRAM

EXTRA STABILITY DIAGRAM

Tent

40

Stakeplacement

G

I

J

K

L

H

I

M

Advertising