GMC 2008 Acadia - Manual (Page 152)

8 (Mist): Turn the band to mist for a single wiping
cycle. Hold it there until the wipers start. Then let
go. The wipers stop after one wipe. Hold the band
on mist longer, for more wipe cycles.
9 (Off): To stop the wipers, move the band to off.
6
(Delay): Turn the band to adjust the delay time.
The delay between wiping cycles becomes shorter
as the band is moved to the top of the lever. This can
be very useful in light rain or snow.
1 (Low Speed): Turn the band away from you to
the first solid band past the delay settings, for steady
wiping at low speed.
2 (High Speed): Turn the band further, to the second
solid band past the delay settings, for high-speed wiping.
Windshield Washer
J (Washer Fluid): Press the button located at the
end of the turn signal/multifunction lever, to spray
washer fluid on the windshield. The wipers clear the
windshield and either stop or return to the preset speed.
The ignition key must be in ACCESSORY or ON for
this to work. See Windshield Washer Fluid on page 5-34
Windshield Washer Fluid.
{ CAUTION:
In freezing weather, do not use your washer
until the windshield is warmed. Otherwise the
washer fluid can form ice on the windshield,
blocking your vision.
WASHER FLUID LOW ADD FLUID is displayed on the
Driver Information Center (DIC) when the washer fluid is
low. See DIC Warnings and Messages on page 3-66.
3-10