License plate lamp, Replacement bulbs, License plate lamp -46 replacement bulbs -46 – GMC 2008 Acadia User Manual
Page 360
Advertising
License Plate Lamp
To replace one of these bulbs:
1. Remove the two screws holding each of the license
plate lamps to the liftgate trim.
2. Turn and pull the license plate lamp forward
through the lift gate trim opening.
3. Turn the bulb socket counterclockwise and pull the
bulb straight out of the socket.
4. Install the new bulb.
5. Reverse steps 1 – 3 to reinstall the license
plate lamp.
Replacement Bulbs
Exterior Lamp
Bulb Number
License Plate Lamp
194
For replacement bulbs not listed here, contact your
dealer/retailer.
5-46
Advertising