Storing the flat tire – GMC 2008 Acadia User Manual

Page 399

Advertising
background image

5. Raise the tire fully against the underside of the

vehicle. Continue turning the lug wrench until
you feel more than two clicks. This indicates that
the compact spare tire is secure and the cable
is tight. The spare tire hoist cannot be
overtightened.

6. Make sure the tire is stored securely. Push, pull (A),

and then try to turn (B) the tire. If the tire moves,
use the lug wrench to tighten the cable.

Storing the Flat Tire

Notice: Storing the full-size flat tire in the
underbody hoist system can expose it to heat from
the exhaust system. This can damage the tire
and underbody hoist system. Do not store the
full-size flat tire in the underbody hoist system.

1. Remove the cable package from the jack

storage area.

2. Remove the small center cap by tapping the back

of the cap with the extension of the shaft, if the
vehicle has aluminum wheels.

3. Put the flat tire in the rear storage area with the

valve stem pointing toward the rear of the vehicle.

5-85

Advertising