Great Planes Big Stik 60 ARF MonoKote - GPMA1221 - Manual (Page 5)

5
5
6
7
8
9
10
1
3
4
1
11
12
2
1 Wing with Aileron
2 Fuselage
3 Stabilizer and Elevator
4 Fin and Rudder
5 Wheels
6 Main Gear
7 Nose Gear
8 Engine Mount
9 Fuel Tank and Hardware
10 Wing Joiners
11 Wing Bolt Plate
12 Small Ventral Fin
Kit Contents
(Photographed)
.40 Size Kit Contents (Not Photographed)
Before starting to build, use the Kit Contents list to take an inventory of your kit to make sure it is complete and inspect
the parts to make sure they are of acceptable quality. If any parts are missing or are not of acceptable quality, or if you
need assistance with assembly, contact Great Planes Product Support. When reporting defective or missing parts, use
the part names exactly as they are written in the Kit Contents list on this page.
Great Planes Product Support:
Phone: (217) 398-8970
Fax: (217) 398-7721
E-mail: [email protected]
KIT CONTENTS
(2) 1/4-20 Blind nuts (pre-installed in fuse)
(2) 24" Grey plastic outer pushrod tube
(pre-installed in fuse)
(2) 11-3/4" Grey plastic outer pushrod
tube (throttle, nose gear)
(2) 12" 074 Wire threaded one end
(ailerons)
(4) 36" 074 Wire threaded one end
(elevator, rudder, throttle, nose gear)
(5) Nylon clevis (rudder, elevator,
ailerons, throttle)
(4) Faslink (rudder, elevator, ailerons)
(2) Nylon 1/4 - 20 wing bolts
(4) Large nylon control horn (aileron,
rudder, elevator)
(1) 2" x 9" Hinge material
(6) Silicone clevis keepers (rudder,
elevator, ailerons, throttle)
(4) 4-40 x 3/4" Socket head cap screw
(engine to engine mount)
(4) # 4 Washers (engine to engine mount)
(4) 6-32 x 1/2" Socket head cap screw
(main gear to fuse)
(4) 6-32 x 3/4" Socket head cap screw
(engine mount to firewall)
(8) 6-32 Blind nuts (main gear, engine
mount)
(8) #6 Washers (main gear, engine mount)
(2) 5/32 x 1-1/4" Axles (main gear)
(2) 5/32" Nuts for axles (main gear)
(6) 5/32" Wheel collar (main landing
gear, nose gear, nose steering)
(1) Steering arm (nose gear)
(6) 6-32 x 1/4" Hex head bolt (wheel
collars)
(8) 2-56 x 1/2" Machine screws (rudder,
elevator, ailerons)
(3) Brass quick connect body (throttle,
nose gear)
(3) Nylon retainer (throttle, nose gear)
(3) 4-40 x 1/4" SHCS (throttle, nose gear)
(1) 2-1/2" Red spinner
(1) Fuel line 24"
(1) Wire tail skid
.60 Size Kit Contents (Not Photographed)
(2) 1/4-20 Blind nuts (pre-installed in fuse)
(2) 24" Grey plastic outer pushrod tube
(pre-installed in fuse)
(2) 11-3/4" Grey plastic outer pushrod
tube (throttle, nose gear)
(2) 12" 074 Wire threaded one end
(ailerons)
(4) 36" 074 Wire threaded one end
(elevator, rudder, throttle, nose gear)
(5) Nylon clevis (rudder, elevator, ailerons,
throttle)
(4) Faslink (rudder, elevator, ailerons)
(2) 1/4 - 20 Nylon wing bolt
(4) Large nylon control horn (aileron,
rudder, elevator)
(1) 2" x 9" Hinge material
(6) Silicone clevis keepers (rudder,
elevator, ailerons, throttle)
(4) 6-32 x 1" Socket head cap screw
(engine to engine mount)
(4) #6 Washers (engine to engine mount)
(4) 8-32 x 1/2" Socket head cap screw
(main gear to fuse)
(4) 8-32 x 1" Socket head cap screw
(engine mount to firewall)
(8) 8-32 Blind nuts (main gear, engine
mount)
(8) #8 Washers (main gear, engine mount)
(2) 5/32 x 1-1/4 axles (main gear)
(2) 5/32 Nuts (main gear axles)
(6) 5/32" Wheel collar (main landing gear,
nose, nose steering)
(1) Steering arm
(6) 6-32 x 1/4" Hex head bolt (wheel
collars)
(8) 2-56 x 1/2" machine screws (rudder,
elevator, ailerons)
(3) Brass quick connect body (throttle,
nose gear)
(3) Nylon retainer (throttle, nose gear)
(3) 4-40 x 1/4" SHCS (throttle, nose gear)
(1) 3" red spinner
(1) Fuel line 24"
(1) Wire tail skid