Great Planes Cosmic Wind Minnow 60 ARF - GPMA1321 - Manual (Page 6)

6
ORDERING REPLACEMENT PARTS
Replacement parts for the Great Planes Minnow ARF are available using the order numbers in the Replacement Parts
List that follows. The fastest, most economical service can be provided by your hobby dealer or mail-order company.
To locate a hobby dealer, visit the Hobbico web site at www.hobbico.com. Choose “Where to Buy” at the bottom of the menu
on the left side of the page. Follow the instructions provided on the page to locate a U.S., Canadian or International dealer.
If a hobby shop is not available, replacement parts may also be ordered from Tower Hobbies at www.towerhobbies.com,
or by calling toll free (800) 637-6050.
Parts may also be ordered directly from Hobby Services by calling (217) 398-0007, or via facsimile at (217) 398-7721, but
full retail prices and shipping and handling charges will apply. Illinois and Nevada residents will also be charged sales tax.
If ordering via fax, include a Visa or MasterCard number and expiration date for payment.
Mail parts orders and payments by personal check to:
Hobby Services
3002 N Apollo Drive, Suite 1
Champaign IL 61822
Be certain to specify the order number exactly as listed in the Replacement Parts List. Payment by credit card or personal
check only; no C.O.D.
If additional assistance is required for any reason contact Product Support by e-mail at [email protected]
or by telephone at (217) 398-8970.
Replacement Parts List
Order Number Description How to Purchase
Missing pieces ................................................Contact Product Support
Instruction manual...........................................Contact Product Support
Full-size plans .................................................Not available
Kit parts listed below.......................................Hobby Supplier
GPMA2491............Wing Kit
GPMA2490............Fuse Kit
GPMA2492............Tail Set
GPMA2493............Cowl
GPMA2496............Canopy
GPMA2494............Landing Gear
GPMA2495............Wheel Pants
GPMA2497............Top Wing Cover Only
IMPORTANT INFORMATION ABOUT WORKING WITH FIBERGLASS
If you have never worked with fiberglass there are a few
basic things you should be aware of:
1. When cutting fiberglass, be sure you are cutting the
correct place. Unlike wood, you are not able to go back and
easily fix a mistake.
2. Whenever you are gluing a part to the inside of fiberglass
it is important to roughen the inside surface of the fiberglass
with 220-grit sandpaper, then wipe the area with rubbing
alcohol. The molding process leaves a waxy residue that
can prevent a good bond between the glue and the parts
being glued.
3. If you do not have a high-speed motor tool such as a
Dremel tool you should consider purchasing one or
borrowing one from a fellow modeler. This, combined with a
fiberglass cut-off wheel will be extremely helpful in the
assembly process.
WARNING: The cowl, wheel pants and fuselage included in
this kit are made of fiberglass, the fibers of which may cause
eye, skin and respiratory tract irritation. Never blow into a
part to remove fiberglass dust, as the dust will blow back
into your eyes. Always wear safety goggles, a particle mask
and rubber gloves when grinding, drilling and sanding
fiberglass parts. Vacuum the parts and the work area
thoroughly after working with fiberglass parts.